Artificial turf has excellent heat insulation effect . Its principle is mainly achieved by reflecting sunlight, blocking heat transfer and insulating the air layer. It is suitable for scenarios such as roofs and sports fields, and can significantly reduce the surface temperature. Heat insulation principle and performance parameters Youdaoplaceholder0 Reflecting sunlight : […]
The specification parameters and material types of artificial turf for football fields mainly include the following contents: Specification of grass fibersYoudaoplaceholder0 grass height : The standard specifications include 40, 50, 55, 60, and 64 millimeters. The mainstream products adopt a grass height of 50 millimeters, which complies with the FIFA standards. Youdaoplaceholder0 density
The selection of artificial turf for football fields requires a comprehensive consideration of factors such as sports performance, material, density, and fillers. The following are the key points: Grass filament height and density Youdaoplaceholder0 five-person : 32-50mm, density ≥8000 clusters /㎡ Youdaoplaceholder0 seven-person : 40-50mm, density ≥8000 clusters /㎡ Youdaoplaceholder0 standard
To judge the quality of artificial turf, a comprehensive examination of raw materials, physical properties, environmental protection standards and professional test reports is required, with particular attention paid to the material of grass fibers, the structure of the base and back, durability and safety indicators. Youdaoplaceholder0 Core quality indicators Youdaoplaceholder0 grass filament material and
Artificial turf itself is usually non-toxic, but inferior products or improper use may pose potential risks. The following is the specific analysis: Material safety The mainstream artificial turf materials include polypropylene (PP) and polyethylene (PE), both of which are non-toxic and environmentally friendly materials. For instance, artificial turf in kindergartens is mostly made of PP
The construction of artificial turf mainly includes six core steps: site preparation, measurement and layout, turf laying, joint treatment, filling materials and acceptance and maintenance. It is necessary to strictly follow the process standards to ensure quality. Youdaoplaceholder0 Site preparation and foundation treatment Youdaoplaceholder0 1, cleaning and inspection : Remove debris, stones and
The pound weight (DTEX) of artificial turf refers to the weight of a tuft of grass fibers over a length of 10,000 meters. It is a key indicator for measuring the quality and density of grass fibers. The higher the value, the thicker and better the quality of the grass fibers. Youdaoplaceholder0 definition and unit
The height of artificial turf is usually between 8mm and 60mm, with the specific range varying depending on the application. Common grass height range Youdaoplaceholder0 Sports fields (such as football fields, tennis courts) : 40-55mm, among which standard 11-a-side football fields commonly use 50-55mm Youdaoplaceholder0 Leisure landscape (such as parks, rooftop greening)
The filling standards for quartz sand and rubber particles in artificial turf should be determined comprehensively based on the type of site, the intensity of sports and the height of the grass. The core ratio is 40% quartz sand and 60% rubber particles (for high-intensity sports), and the filling depth is generally three quarters of
The maintenance and upkeep of leisure artificial turf should be combined with the characteristics of low-frequency usage scenarios. The key lies in keeping the grass fibers clean and the structure stable. The specific methods are as follows: Daily cleaning and maintenance Youdaoplaceholder0 Debris removal : Use a soft-bristled brush or vacuum cleaner to remove